Exhibition category
Contact address
| Address | 173 rue des Fougères, 74890 Bons-En-Chablais, France |
|---|---|
| Telephone | +33450361385 |
| URL | https://www.nicomatic.com/ |
| c.yu@nicomatic.fr |
Main exhibits 1
CMM Micro connectors - 2mm pitch MIL-DTL-55302F
CMM connectors are designed to meet or exceed electrical & mechanical performances of MIL-DTL-55302F and BS-9525-F0033 standards. This modular connector allows more than 20 million arrangements.
Main features:
- Extreme modularity (Signal, power and coaxial contacts, from 1 to 3 rows, up to 120 pins)
- Board-to-board, board-to-wire, wire-to-wire configurations
- Space-saving up to 60%, weight saving up to 50% compared to other existing rectangular micro-connectors with the same functionalities
- Robustness with PPS material: no humidity absorption, oxygen-free, radiation resistance and
- Temperature cycling between -60°C and + 260°C
- Highly resistant to vibrations and shocks
- Lead time from 1 week, no MOQ
- Online 2D and 3D drawings free service
CMM-catalog-en_min （PDF file - 4,731KB）
Main exhibits 2
DMM - 2mm pitch metal connectors - MIL-DTL-83513G
DMM rugged connectors comply with MIL-DTL-83513G performances and enable a wide choice of arrangements compared to other mil-spec connectors like Micro-d or Sub-d. They allow space-saving, electromagnetic & mechanical protection. Moreover, you can use one-piece or two-piece backshells for 360° shielding and protection of your cable interconnection. You can use DMM with Flange for better shielding continuity when mounting on a panel or without Flange as a low-profile solution.
Features :
- 6 weeks lead time, MOQ = 1 part
- High modularity: contacts Signal ( LF), Power (HP), and Coax (HF) up to 10M arrangements
- Board to board, board to wire, wire to wire, panel mount (1 to 4 rows of contacts)
- Miniaturisation: 2mm pitch, low profile
- Ruggedized with aluminium alloy 6061
- Easy maintenance thanks to dismountable contacts
DMM catalogue （PDF file - 5,771KB）
Main exhibits 3
EMM Micro connectors - 1.27mm pitch MIL-DTL-83513
With its 1.27mm pitch, it achieves more than 40% space reduction compared to its parent CMM or 20% compared to standard Micro-D. Designed to meet the performance requirements of MIL 83513, it integrates key features such as reversed contacts, integrated 90° back protection and interchangeable hardware.
Suited to both board-to-board (thanks to its secure wiping length) and board-to-wire (from gauge 24 to gauge 30) configurations, EMM will provide extreme modularity with any pin selection available from 04 to 60 signal contacts. Cable versions can be cabled at Nicomatic, or you can crimp them by yourself: it is up to you!
