Exhibition category
Contact address
| Address | 3125 VETERANS MEMORIAL HWY |
|---|---|
| Telephone | 6314714797 |
| URL | https://www.tptech.co.jp |
| info.t@tptech.co.jp |
Main exhibits 1
VPX3U-ORIN-CX7-FGX2-SBC - secure compute node with advanced AI and HPC processing capabilities, high data transfer rates, and the cyber security features required to ensure data is being protected.
This autonomous SOSA aligned module includes an NVIDIA Jetson AGX Orin Industrial, an NVIDIA ConnectX¬ 7 SmartNIC, and a WOLF FGX2 which provides support for up to 4K video formats that are not native to the Orin SoC.
The NVIDIA Orin’s embedded Ampere GPU provides the CUDA cores and Tensor cores for data processing, deep learning inference, machine vision, audio processing and video encoding/decoding.
The NVIDIA ConnectX-7 SmartNIC provides secure, high-speed network data transfer and a configurable PCIe switch. ConnectX-7 meets the high data transfer and security requirements for C5ISR tasks. It also provides support for RDMA over Converged Ethernet (RoCE) and support for NVIDIA GPUDirect, enabling the fastest method to transfer data across a network to the GPU.
AGX Orin Features
• 2x Deep Learning Accelerator (DLA) v2 engines
• Vision Accelerator engine for 7-way VLIW Vision Processor v2
• Dedicated programmable audio processor
• 2x HEVC (H.265) and AVC (H.264) NVENC and NVDEC with up to 4K-UHD encode resolution
• CUDA® 12, OpenGL® 4.6, OpenGL ES 3.2, Vulkan™ 1.0
• Flash Storage: 64 GB eMMC 5.1 with support for ECC
Connectivity / System Management
• Storage: NVMe 1TB, SATA Gen2 (3 Gbps) interface
• ConnectX PCIe Gen4 Switch, configurable, x8 or bifurcate down to x4 + x4, or down to x2
• Backplane Ethernet with 40/100GBASE-KR4 and 10GBASE-KR data planes; supports GPUDirect RDMA
• 1000BASE-T Ethernet
• USB 3.2 and USB 2.0, µUSB for setup/debug
• Security includes block-level hardware encryption and the use of dedicated encryption keys per user
• Switching is offloaded from the CPU and run on the ConnectX hardware with NVIDIA ASAP2 technology
• On-board IPMI controller for system management
• WOLF BSP with Jetson Linux and JetPack SDK
Mechanical / Open Systems Architecture
• High level of ruggedization:
o Operating temperature: -40° to +80°C
o Vibration (sine wave): 10G peak, 5 - 2000Hz
o Shock: 40G peak
WOLF-Promo_Brochure_GTC-2024 （PDF file - 1,402KB）
Main exhibits 2
68G5 - 3U VPX Multifunction I/O with 3 module slots. Over 100 modules available.
The 68G6 is a SOSA™-Aligned 3U OpenVPX board that can be configured with up to three NAI smart I/O and communication function modules. In addition to the standard expansion plane (EP) PCIe and control plane (CP) Ethernet control interfaces, the 68G6 facilitates convenient external access to supported NAI PCIe function modules through its 1 x1 PCIe interface, enabling seamless expansion of host SBC functions for enhanced project solutions, while also offering external access to supported NAI FMx modules via a SATA II interface. The 68G6 is on NAI’s certifiable product development roadmap supporting DO-178C and DO-254 design assurance guidelines for safety-critical applications. Ideally suited for rugged Mil-Aero applications, the 68G6 delivers off-the-shelf solutions that accelerate deployment of SWaP-optimized systems in air, land and sea applications.
NAI COSA Selection Guide （PDF file - 2,297KB）
Main exhibits 3
LS-28-DRSM - Aeronautical Telemetry Ground Station
LS-28-DRSM Modular Unit Performs Virtually All Typical Ground System Functions
• Single or Dual Channel
• Receiving and Combining
• Multimode Demodulation
o Up to 60Mbps
• Bit Sync/Frame Sync/Decom
• Data Simulation
• Digital Modulator
• IRIG and PTP Time
• Intuitive User Interface
• Health and Status Indicators
• Graphical Signal Displays
